Rolling Sheet Doors

200 Series

200 Series

The 2000 Series is the perfect door for light-duty application that require frequent use.

500 Series

500 Series

Built to perform against the strong winds caused by tomatoes and hurricanes, the 5000 Series' durability meets stringent building codes in coastal areas including Florida.

Product Information

Product Information

These quality low-maintenance car washes, machine shops, auto body shops and more.

Product Information

Product Information

DBCI's wind-rated 5000 Series utilizes deep engagement guides and side curtain windlocks to maintain the operational integrity of the door and comply with most state and local building codes in coastal regions.

Curtain

  • 26-gauge galvanized, Grade E hard steel
  • 5/9" ribbed corrugation
  • Maximum opening size of 12' x1I3'
  • Siliconized polyester WeatherXL' paint over prime coat
  • Available in 23 colors, subject to availability and varying lead times
  • 30-year film integrity warranty, up to 25-year chalk and fade warranty


Bottom Bar
  • 6063-T6 aluminum extrusion
  • 2° x 1 W galvanized angles
  • Bulb astragal
  • Stainless steel nuts and bolts
  • Axle-Drum Assembly
  • 1 5/16" O.D. steel axle, 14-gauge
  • 11-gauge axle on doors over 10' wide
  • Utilizes 12-, 16-gauge drums
  • Shielded steel ball bearings in drums
  • Full top sheet

A.C.E. (Advanced Curtain Engagement) guide system
  • 16-gauge galvanized steel
  • Adjustable bolt on head stop
  • Polyethylene wear strip
  • Pre-punched for lock and attachment fasteners
  • Hardware
  • Saddle clamps with set fasteners
  • 10-gauge slide locks; 2 per door
  • 16-gauge step plate; 2 per door
  • W steel angle T-bracket

Opening Height Headroom
  • Doors up to 10' have 20- of headroom
  • Doors 10' to 14' have 22° of headroom
  • Doors over 14' have 24' of headroom Options
  • Insulation 2250 Series • 1900 Series - low overhead option
  • Chain hoist 4:1 reduction
  • Vision panels (17° x
  • Top draft stop
  • Hood
  • Steel mounting plates
  • Motor operated

 

Curtain

  • 26-gauge galvanized, Grade E hard steel
  • 5/8° ribbed corrugation with three-rivet windlock attachment
  • Maximum opening size of 18' x 16'
  • Si liconized polyester WeathernIN paint over prime coat
  • Available in 23 colors, subject to availability and varying lead times
  • Wash coat over primer interior side
  • 30-year film integrity warranty, up to 25-year chalk and fade warranty
  • Flexible wear strips

Bottom Bar
  • 6063 - T6 aluminum extrusion
  • 2° x 1 Ve galvanized angles
  • Bulb astragal • Stainless steel nuts and bolts Axle-Drum Assembly
  • 1 5,16" co. steel axle, 14-gauge
  • 11-gauge axle on doors over 10' wide
  • Utilizes 12°, 16-gauge drums
  • Shielded steel ball bearings in drums
  • Full top sheet
  • Oil tempered torsion springs A.C.E. (advanced Curtain Engagement)

Guide System
  • 12-gauge galvanized steel
  • 12-gauge wind lock bar
  • Adjustable bolt on head stop
  • Polyethylene wear strip
  • Pre-punched for lock and attachment fasteners Hardware
  • Saddle clamps with set fasteners • 10-gauge slide locks; 2 per door
  • 16-gauge step plate; 2 per door
  • 1/4" steel angle 7-bracket

Opening Height Headroom
  • Doors up to 10' have 20" of headroom
  • Doors 10' to 14' have 22° of headroom
  • Doors over 14' have 24' of headroom


Options
  • Insulated 5250 Series
  • Chain hoist 8:1 reduction
  • Header seal
  • Hood
  • Steel mounting plates
  • Motor operated